SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 2 DI HIGH FEATURE 24V DC, 15 MM WIDTH WITH PARAM. F. INPUT DELAY DIAGNOSIS F. ENCODER SHORT- CIRCUIT W. LED SF (GROUP FAULT) 5 PIECES PER PACKAGING UNIT
Supply voltage |
Rated value (DC) |
|
● 24 V DC |
Yes; From power module |
permissible range, lower limit (DC) |
20.4 V |
permissible range, upper limit (DC) |
28.8 V |
Reverse polarity protection |
Yes |
Input current |
from supply voltage L+, max. |
Dependent on encoder |
from backplane bus 3.3 V DC, max. |
10 mA |
Encoder supply |
Type of output voltage |
min. L+ (-0.5 V), under load |
Short-circuit protection |
Yes; Electronic |
Output current |
● Rated value |
500 mA |
● permissible range |
0 to 500 mA |
Power loss |
Power loss, typ. |
0.4 W |
Address area |
Address space per module |
● with packing |
2 bit |
● without packing |
1 byte |
Digital inputs |
Number of digital inputs |
2 |
Input characteristic curve in accordance with IEC 61131, type 1 |
Yes |
Input voltage |
● Type of input voltage |
DC |
● Rated value (DC) |
24 V |
● for signal "0" |
-30 to +5V |
● for signal "1" |
+11 to +30V |
Input current |
● for signal "1", typ. |
8 mA |
Input delay (for rated value of input voltage) |
for standard inputs |
— parameterizable |
Yes; 0.1 / 0.5 / 3 / 15 ms |
— at "0" to "1", min. |
0.05 / 0.4 / 2.7 / 14.85 |
— at "0" to "1", max. |
0,15 / 0,6 / 3,3 / 15,15 |
— at "1" to "0", min. |
0.05 / 0.4 / 2.7 / 14.85 |
— at "1" to "0", max. |
0,15 / 0,6 / 3,3 / 15,15 |
Cable length |
● shielded, max. |
1 000 m |
● unshielded, max. |
600 m |
Encoder |
Connectable encoders |
● 2-wire sensor |
Yes |
— permissible quiescent current (2-wire sensor), max. |
1.5 mA |
Interrupts/diagnostics/status information |